光纤专用清洁棉签Stick


指南：
1.Which Stick is best for?
　 Connector Type Ferrule Diameter
Stick 1.25 For MU, LC 1.25 mm
Stick 2.5 For SC, FC, ST 2.5 mm

2.What is Stick used for?

Cleaning for the end of ferrule

Cleaning for the inside of sleeve.

　

3. How to clean the end of ferrule?

Step 1:      Picking up on Stick from a sack.If you would like to do Wet Cleaning To infiltrate Stick with ethanol.

Step 2:     Insert Stick into the adapter. And roll Stick 3 times same direction with soft pushing.将棉签插入适配器内，轻柔向里压按，向相同方向旋转3圈。

Step 3:     After cleaning please pull of Stick from the adaptor.

Stick IS ONE TIME USE, PLEASE DUMP IT, AFTER USING一次性使用，使用后丢弃

比较

Comparison in wiping performance
Dust was once applied to a clean endface of the connector plug. The endface was then cleaned with Stick CLEANER or other type product. The return loss was measured before and after dust was applied, and after the cleaning.

Stick CLEANER provides extremely stable cleaning performance, while the other product exhibits unstable cleaning performance and causes dust emission and unhairing. The attempt to clear the endface results in making it even dirtier. Especially when a high-energy laser is used, attached dirt or dust may cause burnout of plug endfaces, which may result in fatal damage to the system.

　 Stick CLEANER Others
Return Loss
Measurement value
　 Initial value At the time of application of dust After cleaning
Stick 1 52.3 11.9 55.4
Stick 2 53.1 13.7 54.3
Stick 3 52.6 17.5 54.3
Stick 4 53.6 15.6 54.2
Stick 5 53.2 31.9 51.8
Stick 6 53.8 20.6 55.0
Stick 7 57.1 13.2 54.9
Stick 8 57.6 23.9 53.9
Stick 9 56.4 19.9 56.8
Stick 10 57.8 33.5 55.8
Avg. 54.7 20.2 54.6
　 Initial value At the time of application of dus After cleaning
Stick 1 57.8 12.9 55.8
Stick 2 57.4 17.2 32.5
Stick 3 57.8 19.2 28.9
Stick 4 56.3 35.3 22.7
Stick 5 57.3 28.1 56.2
Avg. 57.3 22.5 39.2
Evaluation Very Good
Extremely stable cleaning performance		 Not Good
Cleaning performance is unstable and may lead to system trouble.