Comet BF Laser Cleaver for Active Optical Cable (AOC) Production
Product Description
-- Commercial non-contact laser fiber optic connector cleaver
Besides cleaving various bare fibers, the Comet BF laser cleaver can also be used for producing various active optical cables (AOC).
The Comet BF laser cleaver can adjust the cleaving angle and fiber cleaving height, and uses programmable settings to adjust laser energy, cleaving speed, number of cleaves and other process parameters to meet various needs.
The Comet-BF can also be used to strip fiber coatings (such as mid-span access) and to cleave specialty fibers.
Product Advantages
Reduce headcount by eliminating processing steps
No need for polishing equipment and accessories (no maintenance of this device required)
No consumable polishing costs
High yield (less production management and repair)
Cleaves fiber types that are hard to cleave mechanically
Larger outer-diameter fibers
Customizable fixtures
Specifications
Laser safety: Class I product (FDA,
EC)
General safety: UL, CE, FDA
Power: 100~240V AC, 50
~ 60 Hz
Operating temperature range: 10°C to
35°C
Details
Spindle angle adjustable
Cleaving height adjustable
Real-time image monitoring
Controlled cleaving range
Cleaves multiple at once
Various fixtures customizable
Cleaving result
24/7 service
Spindle angle adjustable, e.g. 0 degrees.e.g. 42.5 degrees
Cleaving height adjustable; the fixture base can be finely adjusted left and right to solve multi-fiber height inconsistencies caused by fixture dimensional tolerances or other reasons.
Focus adjustment is easier and can be easily recordedReal-time on-site fiber image monitoring
Cleaving result
The Fire Zone is controllable; the laser cleaving range can be narrowed so that only the fiber is cleaved and not the ferrule body, as shown in the figure.
It can cleave only specified fibers within one device, as shown in the figure:
