Fiber connector end-face images at two magnifications are shown simultaneously on LCD screens. The 9.7" main screen displays the fiber end face at high magnification (e.g. 400x), while the 8" secondary screen shows the ferrule area around the fiber at low magnification.

Single-magnification All-in-one Inspector

The large LCD screen is set back from the controls for ergonomic design. The screen and controls are vertically arranged for comfortable operation. A 10.1" LCD screen ensures sharp images with adjustable brightness/contrast.

Lensed Fiber End-face & Side Inspector

During lensed fiber polishing, simply place the polishing fixture on its side on the inspection stage to clearly view the lensed fiber end face online. Because lensed fibers are polished at different angles, the stage has a special angle adjustment device to position the fixture at the required angle for detailed observation.

Bare Fiber 3D Observation Video Inspector

This system uses a bare-fiber holder that can be moved freely once the bare fiber is clamped. To inspect the fiber end face, place the holder horizontally at the proper position. To inspect the front/side of the bare fiber, place the holder vertically with the desired side facing the optical lens.

Single-magnification Split-type Fiber Inspector

Used to inspect fiber connector end-face quality; ideal for connector manufacturers. Versatile, compatible with various fiber connectors. Ergonomic design. Custom ceramic sleeve adapters that do not damage connectors during insertion/removal.

Multi-magnification Split-type Fiber Inspector

Switchable among three optical magnifications, e.g. 400/200/80x. Fast, convenient and efficient, with sharp, vivid images; saves time and lowers cost. X-Y adjustment: after changing magnification or adapter, if the fiber image is off-center, fine-tune the X-Y axes to position it anywhere on screen, and also inspect details of the ferrule beyond the fiber area.

TOSA End-face Video Inspector

The FVT series video inspector is designed for TOSA end-face and fiber connector end-face inspection. The FVT-200P inspects the end face of the fiber and the ceramic center.

Handheld Video Inspector

In many hardware devices such as fiber optic transceivers, this probe-type video fiber inspector is a practical instrument, since disassembling the system for inspection is often unrealistic. The compact, lightweight video probe contains a coaxial LED light source, an optical lens system, and a 1/3-inch CCD video camera.

AOC Inspector

The FibKey 5600 multi-magnification inspector can be used to observe laser-cut products, such as the end face, side angle, and front profile of a laser-cut fiber.